DMV5065/12 Solenoid Valve Circuit Board Magnet-Nr.1511/2P

Technical Specifications for DMV5065/12 Solenoid Valve Circuit Board Magnet-Nr.1511/2P

Model: DMV5065/12

Designation: Solenoid Valve Circuit Board Magnet

Component Identifier: Magnet-Nr. 1511/2P

Electrical Parameters:

*   Operating Voltage: 12 V DC

*   Coil Resistance: Specify according to manufacturer's data sheet (e.g., typically within a range of XX-XX Ω at 20°C).

*   Power Consumption: Specify according to manufacturer's data sheet (e.g., typically XX Watts).

*   Duty Cycle: 100% continuous duty.

*   Insulation Class: Class F or as per manufacturer's specification.

*   Protection Class: Typically IP00 for the coil assembly itself (board-mounted component).

Mechanical & Physical Parameters:

*   Housing Material: Typically molded plastic or resin encapsulation.

*   Core Material: Ferromagnetic material (e.g., soft iron, electromagnetic steel).

*   Connector Type: PCB pin termination (solder pins or press-fit).

*   Mounting: Direct printed circuit board (PCB) mounting.

*   Dimensions: Exact dimensions are model-specific. Refer to manufacturer's mechanical drawing for length, width, height, and pin spacing.

Functional & Performance Parameters:

*   Valve Type Compatibility: Designed for use with specific solenoid valve series (e.g., DMV5065).

*   Function: Electromagnetic actuator for valve pilot stage or direct actuation, converting electrical signals into mechanical movement to open/close the valve.

*   Response Time: Specify according to manufacturer's data (e.g., typically XX ms energize, XX ms de-energize).

*   Ambient Temperature Range: Specify operating and storage range (e.g., -10°C to +50°C or wider depending on specification).

*   Electromagnetic Compatibility (EMC): Compliant with relevant standards for industrial environments.

Description

The DMV5065/12 Solenoid Valve Circuit Board Magnet, identified as component Magnet-Nr. 1511/2P, is an electromagnetic actuator designed for direct integration onto a printed circuit board (PCB). This unit is the core driving component for the associated solenoid valve model (DMV5065), facilitating direct electronic control from a 12V DC supply.

Its primary function is to generate a controlled magnetic field when energized, which actuates the valve's internal mechanism (plunger or armature).